Hard to Find Accessories and Parts
-
-
Delta lathe knockout bar:
Knockout rod ( Delta catalog # 46-905 ), used for removing centers and other attachments on your lathe. Supported models: Delta 1460, Delta/Rockwell heavy duty and standard duty lathes. Stainless steel with phenolic ball and brass tip.
Pricing: $55.00
Power Tool Maintenance by Daniel W. Irvin:
Classic authoritative text on wood shop tools, their service, maintenance, and adjustment. General maintenance topics as well as tool specific coverage, and copiously illustrated throughout. 291 pages, hardcover. All copies are USED condition with typical discoloration and indications of previous ownership, occasional library stamps, stray marks, etc. Available with or without dust jacket. (Supply Limited !)
Wheel cover knobs for the Homecraft & Delta 10" bandsaw
Part SBS-40, available individually, or as a set of four. Composition: nickel plated steel. Threaded for 1/4 by 20 NC. Fits Homecraft model 28-110 bandsaw, as pictured.
Pricing: $16.50 individual
$50.00 set of four
Parts & Service for your Delta Drill Press
-
-
Now offering rebuild service for the very popular line of Delta/Rockwell 15" utility drill presses. Your quill/spindle will be refurbished to like-new running condition. The assembly will be stripped down, cleaned, polished, and restored with quality components through-out. The reassembled quill/spindle will be ready to be re-installed in your Delta drill press as soon as it arrives at your doorstep. More details found here, expect 2 weeks turn around time
Pricing range: $100.00 for spindle & quill assembly only to $160.00 for spindle/quill and upper pulley bearing cartridge. For variable speed pulley bearing replacement and rebuild of sheeves please call for pricing.
Rebuilt spindle pulley assemblies for the Delta 14" drill press
Due to popular demand, we now offer completely refurbished spindle pulleys. Delta original equipment pulleys rebuilt to like-new condition, incl new ND-88106 bearing installed, available for both the hi speed and slo speed model 14 " (Please email or call for price and availability) Delta-Rockwell drill presses. Worn spindle pulleys and ones with bad bearings are now a 90 second fix ! Limited supply, please email or call for availability and pricing.
DP-277 spindle pulley bearing, for Delta 14" & 15" drill presses,
(ND-88106)
A drop in replacement part for both the high speed and low speed models of the DP220 14" drill press, as well as many classic 15" Delta models. These proprietary bearings are now obsolete, making wear and failure of this critical part a significant issue with the potential purchase and/or operation of one of these fine machines. Double sealed 6205 bearing with pressed on custom extension for inner race. Threaded 3/8 by 24 NF, (National Fine), screw and lock washer included.
Pricing: $58.50 each
ND-88100 special bearings for 14" Delta drill presses (spindle bearings)
Special spindle bearings for your vintage Delta - Rockwell 14 drill press. Corresponds to part numbers ND-88100 and SP-5342. Proprietary design allows for slip fit for use with Delta's changeable drill press spindles.
Pricing: $50.00 individual
$90.00 set of two
Maintain the Classic Look and Feel of your Machines
Wheel Cover Knobs for the 14" bandsaw
Reproductions of the hand nuts used on the 14" bandsaw wheel covers and the belt cover. Typical of the earlier model bandsaws, before the switch to Bakelite. Threaded for 3/8's by 16 threads per inch, nickel plated.
Price: $30.00 each. Set of four: $99.00
Knurled thumb nuts for Delta table saw fences
Used on the 1160 tilting table saw and the old style Unisaw fences (pre-dating the Jetlock fence), this knurled nut tightens down the rear of the fence to the back rail. Often missing in action, they correspond to old Delta part number NCS-272. Threaded for 1/4" by 20 tpi.
Price: $17.50 each
