Quill-Spindle Rebuild Service for the Delta 15" Utility Drill Press:

Spindle/quill rebuild service for the very popular Delta/Rockwell 15" drill press. This service includes dissasembly, cleaning, and reassembly with installation of high quality ABEC bearings set to the proper preload.

Simply remove the quill assembly from your drill press (spindle, quill, chuck and all), and ship to us for a complete, professional rebuild of all critical components.

Shipping address: Hammerscale Technologies, 105 Marshay Meadows Rd, Youngsville, NC 27596.

Any questions, or a quote for your particular drill press, feel free to contact us.

The six spline spindle has a dual bearing cartridge that also can be rebuilt, cost $55.00, while the older model 15" presses (two groove spline) use part  DP-277 spindle pulley bearing. The reassembled quill/spindle can be re-installed in your Delta drill press in just a couple minutes. Expect 2 weeks turn around time.

Pricing: $60.00 spindle & quill assembly only
            $100.00 spindle/quill & 6 spline pulley bearings
            $55.00 Pulley Bearing Cartridge only

Pulley

Spindle & Quill only $60.00 USD Spindle/Quill + Bearing Cartridge $100.00 USD Pulley Bearing Cartridge only $55.00 USD

ND-88100 special bearings for 14" Delta drill presses (spindle bearings) :

Special spindle bearings for your vintage Delta - Rockwell 14 drill press. Corresponds to part numbers ND-88100, C88100 and SP-5342. Proprietary design allows for slip fit for use with Delta's changeable drill press spindles.

Pricing: $50.00 individual
            $90.00 set of two

Quantity

Single $50.00 USD Pair $90.00 USD

If you're changing out a lot of bearings, or have a really stubborn spanner ring you will want this dedicated spanner ring driver. A custom designed solution for the Delta/Rockwell 14" drill press quill bearing rings. Alloy steel, 5/8" drive, for use with a hand wrench or large tap wrench.

Pricing: $35.00 spanner ring driver only
            $120.00 when purchased as combo with ND-88100 bearing (pair)

Quantity

Driver Only $35.00 USD Driver w/ two ND-88100 bearings $120.00 USD

DP-277 spindle pulley bearing, for the Delta / Rockwell 14" and 15" drill press:

For Delta 14" drill press, as well as 15" machines with the old style spindle. Spindle pulley bearing number #88106. Corresponds to Delta parts DP-277, SP-5373, 1202434, ND-88106, and HDP-129. Comes with special machine screw DP-279 and lock washer.

Price: $54.50 each.

Depth Stop Nuts, Delta 14" drill press:

Sold in pairs, depth stop nuts are threaded for 1/2" by 16 National Special. Available in nickel plate and black oxide finish. Also available is the DP-318 special washer. Prices are $38.50 per pair black oxide, & $45.00 in nickel plate.

Finish

nickel plated $45.00 USD black oxide $38.50 USD

DP-318 special washer, 1/2 inch rod, available in nickel plate ($3.50) or black oxide ($3.00)

Finish

nickel plated $3.50 USD black oxide $3.00 USD

Ball end feed lever, part DP-748:

Accomodates all Delta-Rockwell presses with 7/16's pinion hole, incl most 14", 15", and 17" machines. Stainless steel with phenolic knobs. Overall length 12".

Price: $45.00

Please choose color

Black knobs Red knobs

Pilot wheel levers, (DP-632), single or set of 3:

Lever and knob combo for the three spoke "Pilot" wheel found on many 17 inch drill presses, or any Delta press with the # 969 Pilot Wheel upgrade.

Price: $24.00 each
$67.50 set of three

Quantity

1 Lever $24.00 USD Set of 3 $67.50 USD

Special Delta hi acorn nuts (DP-828):

Used in attaching head, table and table raising ring/column stop for Delta 17" drill presses. Made of nickel plated steel, threaded 7/16 by 14 tpi.

Price: $12.50 each.

Depth Stop Nuts, - Acme thread - Delta 15" and 17" drill presses:

Depth stop nuts available in Acme thread. 3/4 by 10 tpi. Sold in pairs. Prices are $60.00 per pair black oxide, & $75.00 in nickel plate.

Finish

Black oxide $60.00 USD Nickel plated $75.00 USD

Special washer for above, nickel plated or black oxide finish.

Finish

Black oxide $4.50 USD Nickel plated $5.00 USD

5/8 by 10 Acme thread, found on many 15 inch as well as 17 inch machines. Sold in pairs. Prices are $55.00 per pair black oxide, & $69.00 in nickel plate.

Finish

Black oxide $55.00 USD Nickel plated $69.00 USD

Special washer for above, nickel plated or black oxide finish.

Finish

Black oxide $4.50 USD Nickel plate $5.00 USD

---